ISO Valve International Standard
| NO. | Standard code | Standard name |
| ISO | ||
| 1 | ISO – 5209 – 77 | Industrial valve marking |
| 2 | ISO – 5752 – 88 | The structural length of the metal valve in the flange piping system |
| 3 | ISO – 5996 – 84 | Cast iron gate valve |
| 4 | ISO – 6552 – 89 | Definition of terms for automatic steam traps |
| 5 | ISO – 6553 – 80 | Automatic steam trap one mark |
| 6 | ISO – 6554 – 80 | Flange connection automatic steam trap structure length |
| 7 | ISO – 6704 – 89 | Automatic steam trap classification |
| 8 | ISO – 6948 – 81 | Automatic steam trap-product test and working characteristic test |
| 9 | ISO – 7121 – 86 | Flange connection steel ball valve |
| 10 | ISO – 7259 – 88 | Cast iron gate valve for underground use mainly operated by a wrench |
| 11 | ISO – 7508 – 85 | Basic dimensions of metric series of unplasticized vinyl chloride (PVC-U) valves for pressure pipelines |
| 12 | ISO – 7841 – 88 | Automatic steam trap-air leakage measurement-test method |
| 13 | ISO – 7842 – 88 | Automatic steam trap—determination of displacement—test method |
| 14 | ISO – 8233 – 88 | Thermoplastic valve, torque test method |
| 15 | ISO/DIN4126 – 85 | General requirements for safety valves |
| 16 | IS0/DIN5208 – 87 | Industrial valves-pressure test of valves |
| 17 | IS0/DIN5210-89 | Multi-turn valve drive connection |
| 18 | ISO/DIN5211 – 89 | Partial rotary valve drive connection |
| 19 | IS0/DIN6002 – 88 | Steel gate valve with bolted bonnet |
| 20 | ISO/DIN | Steel globe valve with bolted bonnet |
| 21 | ISO/DIN – 88 | Valve fire test requirements |
| 22 | ISO/DIN10631 – 91 | General-purpose metal butterfly valve |
| 23 | ISO – 8242 – 89 | Polypropylene valve for pressure pipe basic size metric series |
ANSI American National Standard for Valves
| NO. | Standard code | Standard name |
| ANSI | ||
| 1 | ANSI – B16.10-86 | Flange connection and welded steel valve structure length |
| 2 | ANSI – B16.33-81 | Manually operated metal gas valves for gas piping systems with pressures below 125 psi |
| 3 | ANSI – B16.34-81 | Valve-flange connection and butt welding connection |
| 4 | ANSI – B16.37-80 | Control valve static pressure test |
| 5 | ANSI – B16.38-85 | Large manual metal gas valve for gas distribution system whose maximum allowable operating pressure does not exceed 1251b£/m2 (8.6bar, gauge pressure) |
| 6 | ANSI – B16.40-85 | Manual thermoplastic gas shut-off device or valve for gas distribution system |
| 7 | ANSI – B16.41-83 | Quality requirements for power drive valve components in nuclear power plants |
| 8 | ANSI – B16.104-76 | Control valve seat leakage |
| 9 | ANSI – B95.1-77 | Terminology of pressure relief device |
| 10 | ANSI – B146.1-77 | Steel flange connection safety relief valve |
| 11 | ANSI – C33.83 -72 | Used for! Safety Standards for Electric Valves in Class A, B, C, D Groups and || Class E, F, G Groups in Hazardous Areas |
| 12 | ANSI – N278.1 -75 | Standards for functional specifications of automatic and power-driven safety valves |
| 13 | ANSI/FC175 -1-79 | Test conditions and test procedures for measuring the electrical performance of electromagnetic valves |
| 14 | ANSI/FC169 -1-77 | Pressure rating standards for steam traps |
| 15 | ANSI/UL1121-79 | Safety standards for marine through-shell fittings and marine valves |
| 16 | ANSI/ASME PTC25.3-76 | Safety valve performance test specification |
| 17 | ANSI/ISA-S75.01 | Quantitative equation of control valve |
| 18 | ANSI/UL352 – 81 | Constant oil level valve standard |
| 19 | ANSI/AP1527 – 78 | Conventional seat tightness of safety relief valve with metal seal |
| 20 | ANSI/AWWAC500-86 | Water supply and drainage system gate valve |
| 21 | ANSI/AWWAC501- 87 | Cast iron water gate |
| 22 | ANSI/AWWAC509 – 80 | Resilient valve seat gate valve for water supply and drainage system |
| 23 | ANSI/AWWAC506 – 78 | Backflow prevention device a pressure reducing principle type and double check valve type |
| 24 | ANSI/ASTMB462 – 79 | Forged or rolled stainless steel, nickel, iron, molybdenum, copper, niobium stabilized alloy (UN-SNoS020) pipe flanges, forged pipe fittings, valves and external parts for corrosion and high-temperature work |
| 25 | ANSI/UL312 – 89 | Fire protection device check valve |
| 26 | ANSI/UL1478 – 88 | Refractory pump pressure reducing valve |
| 27 | ANSI A126 | Grey cast iron parts for valves, flanges and pipe fittings |
| 28 | ANSI A181 | Forged or rolled steel flanges and forged pipe fittings, valves and parts for general use |
| 29 | ANSI/ASTM A217M | Specification for martensitic stainless steel and alloy steel castings for high temperature pressure parts |
| 30 | ANSI B1.1 | Unified inch thread (UN and UNR thread form) |
| 31 | ANSI B1.5 | Trapezoidal thread (ACME) |
| 32 | ANSI B1.8 | Short Tooth Trapezoidal Thread (ACME) |
| 33 | ANSI B1.20.1 | Pipe thread general purpose |
| 34 | ANSI B1.20.3 | Seal pipe thread |
| 35 | ANSI B2.1 | Pipe thread (except dry seal thread) |
| 36 | ANSI B16.1 | Cast iron pipe flanges and flanged pipe fittings |
| 37 | ANSI B16.5 | Flanges and flange accessories |
| 38 | ANSI B16.10 | Valve structure length |
| 39 | ANSI B16.11 | Socket welding and threaded connection forged pipe fittings |
| 40 | ANSI B16.14 | Steel pipe plug, bushing and lock nut (with pipe thread) |
| 41 | ANSI B16.20 | Channel steel flange and ring metal gasket |
| 42 | ANSI B16.21 | Non-metallic flat gasket (for pipe flange) |
| 43 | ANSI B16.24 | Bronze flanges and flange pipe fittings CL150 and CL300 |
| 44 | ANSI B16.25 | Butt welding end |
| 45 | ANSI B16.34 | Flanged, threaded and welded end valves |
| 46 | ANSI B16.42 | Malleable cast iron pipe flanges and fittings |
| 47 | ANSI B18.2.2 | Square Nut and Hex Nut (Inch Series) |
| 48 | ANSI B18.5 | Round head screw |
| 49 | ANSI B31.3 | Chemical plant and oil refinery pipeline |
| 50 | ANSI B36.10M | Welded pipe and seamless steel pipe |
| 51 | ANSI B46.1 | Surface structure (surface roughness, waviness) |
| 52 | ANSI B95.1 | Terminology of decompression device |
| 53 | ANSI/AWWA C504 | Rubber gasket seal butterfly valve |
| 54 | ANSI/AWWA C 509 | Elastic seated gate valve for water supply |
| 55 | ANSI/FCI 69-1 | Standards for pressure ratings of traps |
| 56 | ANSI/FCI 70-2 | Control valve seat leakage |
| 57 | ANSI/FCI 85-1 | Trap product testing |
| 58 | ANSI/FCI 87-1 | Classification and operating principle of traps |
| 59 | ANSI/FCI 87-2 | Standard for power signal of spring template drive control valve |
| 60 | ANSI/FCI 91-1 | Control the quality standard of valve sealing |
| 61 | ANSI/UL 132 | Safety standards for safety valves for anhydrous ammonia and liquefied petroleum gas |
| 62 | ANSI/UL 144 | Safety standards for liquefied petroleum gas pressure regulating valve |
| 63 | ANSI/UL 753 | Alarm accessory for automatic water supply control valve for fire-fighting equipment |
| 64 | ANSI/API 527 | Seat tightness of safety valve |
| 65 | ANSI/API 608 | Butt welding and flange end metal ball valve |
| 66 | ANSI/ASSE 1003 | Pressure reducing valve for domestic water supply system |
| 67 | ANSI/ASSE 1046 | Thermal expansion pressure reducing valve |
| 68 | ANSI/ASTM F 1508 | Specification for angle relief valves for steam, gas and liquid equipment |
| 69 | ANSI T 3.5.14 R1 | Hydraulic transmission. Directly controlled valves. Determination of boundary characteristics |
| 70 | ANSI(NFPA)T3.21.4 R2 | Pneumatic valve NFPA/T2.6.1 R2-2000 Supplement: Pressure rating of hydraulic components Test fatigue and determine the pressure of hydraulic pneumatic valves with metal shells |
| 71 | ANSI/(NFPA) T 3.21.8 | Pneumatic and hydraulic. Measurement of response time. Direct valve control |
| 72 | ANSI Z21.22a Addenda | Safety valve for hot water supply system and automatic gas shut-off system. |
| 73 | ANSI Z21.22 | Safety valve for hot water supply system and automatic gas shut-off system |
| 74 | ANSI Z 21.22a | Pressure reducing valve and vacuum pressure reducing valve |
| 75 | ANSI Z 21.22b | Pressure reducing valve of hot water supply system |
| 76 | ANSI/ASHRAE 17 | Test method for rated capacity of thermostatic refrigerant expansion valve |
| 77 | ANSI/ARI 750 | Refrigerant thermostatic expansion valve |
| 78 | ANSI/ISA 75.01.01 | Flow equation for size control valve |
| 79 | ANSI/ISA 75.08.01 | Face-to-face dimensions of integral flanged ball control valve body (type 125, 150, 250, 300, and 600) |
| 80 | ANSI/ISA 75.08.02 | Dimensions between the end faces of flangeless control valves (class 150, 300, and 600) |
| 81 | ANSI/ISA S 75.08.03 | Socket welding end and screw end spherical control valve surface to surface size |
| 82 | ANSI/ISA S 75.08.04 | Face-to-face dimensions of the butt-welded ball control valve |
| 83 | ANSI/ISA 75.08.05 | Face-to-face dimensions of butt-welded ball control valves (types 150, 300, 600, 900, 1500, and 2500) |
| 84 | ANSI/ISA 75.08.06 | Face-to-face dimensions of flanged ball control valve bodies (types 900, 1500 and 2500) |
| 85 | ANSI/ISA S 75.08.07 | Face-to-face dimension of independent flange spherical control valve |
| 86 | ANSI/ISA S 75.15 | Face-to-face dimensions of the butt-welded ball control valve (ANSI grade 150, 300, 600, 900, 1500, 2500) |
| 87 | ANSI/ISA S 75.19.01 | Hydrostatic test of control valve |
| 88 | ANSI/IEEE 1290 | Guidelines for the application, protection, control and testing of electric control valve motors in nuclear power stations |
American Society for Testing and Materials Valve Standard
| NO. | Standard code | Standard name |
| ANSI | ||
| 1 | A182 – 88 | Forged or rolled alloy flanges for high temperature forged pipe fittings, valves and other parts |
| 2 | A338 – 84 | Malleable cast iron flanges, pipe fittings and valves |
| 3 | A522 – 76 | Forged or rolled 8% and 9% nickel alloy steel flanges, pipe fittings, valves and other parts for low-temperature use |
| 4 | A694 – 74 | Forged carbon steel and alloy steel flanges, fittings, valves and other parts for high-voltage transmission lines |
AWWA American Water Works Association
| NO. | Standard code | Standard name |
| AWWA | ||
| 1 | AWWA – A504-80 | Rubber seat butterfly valve |
| 2 | AWWA -A507 – 85 | 6 inch ~ 48 inch ball valve |
| 3 | AWWA -A508 – 82 | Swing check valve for water supply equipment with a nominal diameter of 2 inches 2-24 inches |
MSS American Valve and Fitting Manufacturers Standardization Association Valve Standards
| NO. | Standard code | Standard name |
| MSS | ||
| 1 | MSS SP-42-78 | 150L6 flange and welded corrosion-resistant gate valve. Globe valve. Angle valve and check valve |
| 2 | MSS SP-53-80 | Quality Standard for Steel Castings of Valves, Flanges, Pipe Fittings and Piping Accessories-Magnetic Particle Inspection Method |
| 3 | MSS SP-54-80 | Quality Standard for Steel Castings of Valves, Flanges, Pipe Fittings and Pipe Fittings-Radiographic Test Method |
| 4 | MSS SP-55-85 | Quality standards for steel castings of valves, flanges, pipe fittings and their pipe fittings (visual method) |
| 5 | MSS SP-61-77 | Pressure test of steel valve |
| 6 | MSS SP-67-76 | Butterfly valve |
| 7 | MSS SP-70-76 | Cast iron gate valve with flange and threaded end |
| 8 | MSS SP-71-76 | Cast iron swing check valve with flange and threaded end |
| 9 | MSS SP-72-76 | Ball valve with flange end and welding end |
| 10 | MSS SP-80-74 | Bronze gate valves, globe valves, angle valves and check valves |
| 11 | MSS SP-81-81 | Stainless steel knife gate valve without bonnet flange connection |
| 12 | MSS SP-82-76 | Valve pressure test method |
| 13 | MSS SP-84-78 | Socket welding and threaded connection steel valve |
| 14 | MSS SP-85-76 | Flange connection and threaded connection cast iron angle globe valve |
| 15 | MSS SP-86-81 | MSS Guidelines for Metric Data of Valve Flanges and Fittings |
| 16 | MSS SP-88-83 | Diaphragm valve |
| 17 | MSS SP-91-84 | Manual valve operation guide |
| 18 | MSS SP-92-80 | MSS Valve User Guide |
| 19 | MSS SP-93-82 | Valves, flanges, pipe fittings and other pipeline accessories-steel castings and forgings quality standards-liquid penetration inspection method |
| 20 | MSS SP-94 | Ultrasonic inspection method for quality standards of ferritic and martensitic steel castings of valves, flanges, pipe fittings and other pipeline accessories |
| 21 | MSS SP-95 | Die forging threaded pipe joints and large pipe plugs |
| 22 | MSS SP-97 | Integral reinforced forged branch lead-out pipe fittings-socket welding, threaded and welded ends |
| 23 | MSS SP 108 | Cast iron eccentric plug valve with elastic seal |
| 24 | MSS SP-117 | Bellows seals for globe valves and gate valves |
| 25 | MSS SP 118 | Flange end, flangeless end, threaded end and welded end compact steel globe valve and check valve (for chemical and petroleum refining) |
| 26 | MSS SP-120 | Design Requirements for Flexible Graphite Packing System of Lifting Stem (Rising Stem) Steel Valves |
| 27 | MSS SP-125 | Spring-loaded center-oriented gray cast iron and ductile iron pipeline check valve |
| 28 | MSS SP-126 | Spring-loaded center-oriented steel pipeline check valve |
ASTM American Society of Testing Materials
Standards
| NO. | Standard code | Standard name |
| ASTM | ||
| 1 | ASTM A6/A6M | General requirements for rolled steel plates, sections, sheet piles and bars for structural use |
| 2 | ASTM A27/A27M | Standard technical conditions for general purpose carbon steel castings |
| 3 | ASTM A29/A29M | Standard Specification for Hot Forged Carbon Steel and Alloy Steel Bars General Requirements |
| 4 | ASTM A36/A36M | Standard Specification for Carbon Structural Steel |
| 5 | ASTM A48/A48M | Standard technical conditions for grey cast iron castings |
| 6 | ASTM A105/A105M | Carbon steel forgings for pipe parts |
| 7 | ASTM A106 | Specification for seamless carbon steel pipes for high temperature |
| 8 | ASTM A108 | Standard Specification for Cold Finish Rolled Carbon Steel and Alloy Steel Bars |
| 9 | ASTM A126 | Specification for grey cast iron pipe fittings for valves, flanges and pipe fittings |
| 10 | ASTM A181 | Specification for forged or rolled steel pipe flanges, forged pipe fittings, valves and parts for general purposes |
| 11 | ASTM A182 | Forged or rolled alloy steel and stainless steel flanges, forged pipe fittings, valves and components for high temperature |
| 12 | ASTM A193/A193M | Technical requirements for alloy steel and stainless steel bolt materials for high temperature |
| 13 | ASTM A194/A194M | Technical requirements for carbon steel and alloy steel nuts for high temperature and high pressure bolts |
| 14 | ASTM A203 | Specification for nickel alloy steel plates for pressure vessels |
| 15 | ASTM A216/A216M | Specification for carbon steel castings suitable for fusion welding for high temperature |
| 16 | ASTM A217 | Specification for martensitic stainless steel and alloy steel castings for high temperature pressure parts |
| 17 | ASTM A240/A240M | Heat-resistant chromium and chromium-nickel stainless steel medium and thick plates, thin plates and strips for pressure vessels |
| 18 | ASTM A250/A250M | Specification for electric resistance welded ferritic alloy steel pipes for boilers and superheaters |
| 19 | ASTM A276 | Specification for stainless and heat-resistant steel bars and sections |
| 20 | ASTM A278/A278M | Specification for gray iron castings for pressure-bearing parts whose high temperature does not exceed 345℃ |
| 21 | ASTM A283/A283M | Specification for low and medium tensile strength carbon steel plates |
| 22 | ASTM A285/A285M | Standard technical conditions of low and medium tensile strength carbon steel for pressure vessels |
| 23 | ASTM A307/A307M | 6000PSI Tensile Strength Carbon Steel Studs and Bolts Standard Specification |
| 24 | ASTM A312/A312M | Specification for seamless or welded and heavily cold worked austenitic stainless steel pipes |
| 25 | ASTM A320/A320M | Standard Specification for Alloy Steel Bolt Materials for Low Temperature |
| 26 | ASTM A333/A333M | Standard specification for seamless and welded steel pipes for cryogenic equipment |
| 27 | ASTM A334/A334M | Standard specification for seamless and welded carbon and alloy steel pipes for cryogenic equipment |
| 28 | ASTM A335 | Specification for seamless ferritic alloy steel pipe for high temperature equipment |
| 29 | ASTM A336/A336M | Specification for alloy steel forgings for high temperature pressure parts |
| 30 | ASTM A350/A350M | Standard specification for carbon steel and low-alloy steel forgings for pipe components requiring notch toughness test |
| 31 | ASTM A351/A351M | Specification for austenitic steel castings for pressure parts |
| 32 | ASTM A352/A352M | Standard Specification for Ferritic and Martensitic Steel Castings for Low Temperature Bearing |
| 33 | ASTM A387/A387M | Standard Specification for Chromium Molybdenum Alloy Steel for Pressure Vessels |
| 34 | ASTM A395 | Specification for ductile iron castings |
| 35 | ASTM A403/A403M | Standard Specification for Forged Austenitic Stainless Steel Pipe Fittings |
| 36 | ASTM A404 | Forged or rolled alloy steel pipe flanges, forged pipe fittings, valves and parts with special heat treatment for high temperature |
| 37 | ASTM A405/A405M | Specification for seamless ferritic alloy steel pipes subjected to special heat treatment for high temperature |
| 38 | ASTM A439 | Specification for austenitic ductile iron castings |
| 39 | ASTM A479 | Specification for alloy steel bars and profiles |
| 40 | ASTM A484/A484M | Standard specification for general requirements for stainless and heat-resistant steel bars, billets and forgings |
| 41 | ASTM A516 | Specification for carbon steel plates for medium temperature and low temperature pressure vessels |
| 42 | ASTM A522 | Forged or rolled 8% and 9% nickel alloy steel flanges, pipe fittings, valves and parts for low temperature use |
| 43 | ASTM A536 | Standard Specification for Ductile Iron Castings |
| 44 | ASTM A582 | Specification for hot-rolled or cold-worked inorganic stainless steel and heat-resistant steel bars |
| 45 | ASTM A694/A694M | Forged carbon steel and alloy steel flanges, pipe fittings, valves and other parts for high-pressure pipelines |
| 46 | ASTM A744 | Specification for corrosion-resistant iron, chromium, nickel, and nickel-based alloy castings used under severe conditions |
| 47 | ASTM A961 | Standard Specification for General Requirements for Pipeline Steel Flanges, Forged Fittings, Valves and Parts |
| 48 | ASTM B16 | Standard specification for easy-turning brass bars and profiles for wire cutters |
| 49 | ASTM B62 | Standard Specification for Synthetic Bronze or Copper Alloy Castings |
| 50 | ASTM B462 | Forged or rolled chromium, nickel, molybdenum, copper, niobium stabilized alloys for high temperature corrosion resistance (UNS No6030, UNS No 6022, UNS No 6200, UNS No 8020, UNS No 8024, UNS No 8026, UNS No 8367, UNS No 10276, UNS N10665, UNS N 10675, UNS R20033) Standard Specification for Alloy Pipe Flanges, Forged Fittings, Valves and Parts |
| 51 | ASTM B473 | UNS No8020, No8026 and UNS No8024 nickel alloy rods and wires |
| 52 | ASTM B564 | Standard Specification for Nickel Alloy Forgings |
| 53 | ASTM B584 | Copper alloy sand castings for general purposes |
| 54 | ASTM E10 | Brinell hardness test method for metallic materials |
| 55 | ASTM E 675 | Standard Specification for Interchangeable Conical Grounding Plug Valves and Plugs |
| 56 | ASTM E 911 | Glass tube stopcock with polytetrafluoroethylene (PTFE) plug |
| 57 | ASTM F885 | Standard Specification for Outer Dimensions of Bronze Globe Valves with Nominal Diameter of NPS 1/4～2 |
| 58 | ASTM F992 | Standard Specification for Valve Nameplate |
| 59 | ASTM F993 | Standard Specification for Valve Locking Device |
| 60 | ASTM F1030 | Selection criteria for valve operating devices |
| 61 | ASTM F1098 | Standard Specification for Outer Dimensions of Butterfly Valves with Nominal Diameters NPS2～24 |
| 62 | ASTM F 1139 | Steam trap and drain |
| 63 | ASTM F 1370 | Pressure reducing valve for ship water supply system |
| 64 | ASTM F 1565 | Standard Specification for Pressure Reducing Valves for Steam Equipment |
| 65 | ASTM F 1795 | Standard Specification for Pressure Reducing Valves for Air or Nitrogen Systems |
| 66 | ASTM F 1985 | Standard Specification for Pneumatically Operated Spherical Control Valve |
API American Petroleum Institute Valve Standard
| NO. | Standard code | Standard name |
| API | ||
| 1 | API 6A | Inspection and testing of wellhead water safety valves and underwater safety valves in offshore operations (including errata in December 1996) |
| 2 | API 6D | Pipeline valves (gate valves, plug valves, ball valves and check valves) (including Supplement 2 in December 1997 and errata in December 1998) |
| 3 | API 6FA | Fire resistance test of valves April 1994, version 3 |
| 4 | API 6FC | Fire resistance test of valves with automatic back seats |
| 5 | API 6FD | Fire resistance test of check valve |
| 6 | API 14A | Technical specification for underwater safety valve equipment (ISO 10432:1999) |
| 7 | API 14B | Design, installation, maintenance and operation of underwater safety valve systems (including 1996 errata) |
| 8 | API 14H | Installation, maintenance and maintenance of safety valves and underwater shut-off valves on offshore platforms (including errata issued on September 23, 1996) |
| 9 | API 589 | Evaluate the fire resistance test of stem packing |
| 10 | API 591 | Refinery valve user acceptance |
| 11 | API 594 | Disc type, disc type one lug and double flange check valve (ANSI/API Std 594-1993) |
| 12 | API 598 | API Std 598-2004 |
| 13 | API 599 | Metal plug valve-flange type and butt welding connection type |
| 14 | API 600 | Flange and butt welding connection steel spiral sealing bonnet and pressure sealing bonnet |
| 15 | API 602 | Small steel gate valve with flange, thread, welding and straightened body end |
| 16 | API 603 | Class 150 cast corrosion-resistant flange gate valve (ANSI/API Std 603-993) |
| 17 | API 607 | Fire resistance test of soft seat right angle rotary valve (ANSI/API Std 607-1993) |
| 18 | API 608 | Flange, screw and butt welding connection metal ball valve (ANSI/API Std 608-1995) |
| 19 | API 609 | Double flange butterfly valve and lug one disc butterfly valve |
BS EN British National Standard for Valves
| NO. | Standard code | Standard name |
| BS EN | ||
| 1 | BS EN 287-1:1992/A1:1997 | Welder qualification-welding part 1 steel |
| 2 | BS EN 288-1:1992/A1:1997 | Qualification of Welding Procedures for Metallic Materials Part 1 General Rules for Fusion Welding |
| 3 | BS EN 288-2:1992/2A1:1997 | Welding Procedure Qualification for Metallic Materials Part 2 Arc Welding Procedure Test |
| 4 | BS EN 288-3:1992/A1:1997 | Qualification of Welding Procedures for Metallic Materials Part 3 Arc Welding Procedure Test for Steel |
| 5 | BS EN 331-1998 | Manually operated ball valves and bottom taper plug valves for building gas supply equipment |
| 6 | BS EN 736-3:1999 | Valve-Terminology Chapter 3 Definition of Terms |
| 7 | BS EN 816-1997 | Bathroom faucet cock device, automatic shut-off valve PN10 |
| 8 | BS EN 1074-3-2000 | Water supply valves. Purpose requirements and the rationality of appropriate acceptance tests. Check valves |
| 9 | BS EN 1074-5-2001 | Water supply valves. Tests for suitability and special requirements. Control valves |
| 10 | BS EN 1092-1:2002 | Steel flange |
| 11 | BS EN 1171:2002 | Industrial valves—cast iron gate valves |
| 12 | BS EN 1267:1999 | Valves—use water as the test medium to test the flow resistance of the valve |
| 13 | BS EN 1333：1997 | Definition and selection of PN for pipeline components |
| 14 | BS EN 1349:2000 | Industrial process control valve |
| 15 | BS EN 1489-2000 | Building valves. Pressure safety valves. Tests and requirements |
| 16 | BS EN 1491-2000 | Building valves. Expansion valves. Tests and requirements |
| 17 | BS EN 1503-1:2000 | Valves—materials of valve body, bonnet and cover plate Part 1 Steel grades specified in European standards |
| 18 | BS EN 1503-2:2000 | Valves—materials of valve body, bonnet and cover plate Part 2 Steel grades not specified in European standards |
| 19 | BS EN 1503-3:2000 | Valves—materials of valve body, bonnet and cover plate Part 3 Cast iron specified in European standards |
| 20 | BS EN 1515-1:2000 | Flange and its connecting parts—bolts Part 1 Selection of bolts |
| 21 | BS EN 1567-2000 | Building valves-pressure reducing valves and combination pressure reducing valves-requirements and tests |
| 22 | BS EN 1704-1997 | Plastic piping systems. Thermoplastic valves. Test methods for valve integrity after temperature cycling under bending conditions |
| 23 | BS EN 1984：2000 | Industrial valve-steel gate valve |
| 24 | BS EN 12050-4-2001 | Wastewater lifting equipment for buildings and construction sites. Principles of manufacturing and testing. Non-return valves for waste water containing feces and feces |
| 25 | BS EN 12266-1-2003 | Industrial Valves-Valve Test Part 1: Pressure Test, Test Procedure and Acceptance Standard-Mandatory Requirements |
| 26 | BS EN 12266-2-2002 | Industrial Valves-Valve Test Part 2: Tests, Test Procedures and Acceptance Standards-Supplementary Requirements |
| 27 | BS EN 12288-2003 | Industrial Valve-Copper Alloy Gate Valve |
| 28 | BS EN 12334：2001 | Industrial valves—cast iron check valves |
| 29 | BS EN 12351：1999 | Industrial valves—protective covers for flange-end valves |
| 30 | BS EN 12516-3-2002 | Valve-Shell Design Strength Part 3: Experimental Method |
| 31 | BS EN 12560-1:2001 | Flange and its connecting parts-gaskets for flanges (English) |
| 32 | BS EN 12560-2:2001 | Part 1 Non-metallic flat gaskets with or without fillers Flange and its connecting parts—gasket for flange (imperial system) |
| 33 | BS EN 12560-3:2001 | Part 2 Spiral Wound Gaskets for Steel Flanges Flange and its connecting parts—gasket for flange (imperial system) |
| 34 | BS EN 12560-4:2001 | Chapter 3 Non-metallic polytetrafluoroethylene (PTFE) coated gaskets Flange and its connecting parts-gaskets for flanges (English) |
| 35 | BS EN 12560-5:2001 | Chapter 4 Corrugated, flat or toothed metal gaskets with or without fillers for steel flanges Flanges and their connecting parts—gaskets for flanges (English) |
| 36 | BS EN 12569:1999 | Chapter 5 Metal Ring Connection Gaskets for Steel Flanges Industrial valves—requirements and tests for valves used in the chemical and petrochemical processing industries |
| 37 | BS EN 12570:2000 | Industrial valves-determine the size and method of operating elements |
| 38 | BS EN 12627:1999 | Industrial valves—butt welded ends of steel valves |
| 39 | BS EN 12760:1999 | Valve-socket welding end of steel valve |
| 40 | BS EN 12982:2000 | Industrial valves—The (end-to-end and center-to-end) structure length of butt-welded end valves |
| 41 | BS EN 13397:2002 | Industrial valves—diaphragm valves made of metal materials |
| 42 | BS EN 13648-1-2002 | Condensation container. Anti-overpressure protection facility. Safety valve for condensing equipment |
| 43 | BS EN 13709-2003 | Industrial Valves-Steel Globe Valves and Globe Check Valves |
| 44 | BS EN 13789-2003 | Industrial Valve-Cast Iron Ball Valve |
| 45 | BS EN 13828-2003 | Building valves. Manual copper alloy and stainless steel ball valves for drinking water supply in buildings. Tests and requirements |
| 46 | BS EN 13953-2003 | Movable pressure relief valve that can fill gas cylinders for liquefied petroleum gas (LPG) |
| 47 | BS EN 28233-1992 | Torque test method for thermoplastic valves |
| 48 | BS EN 28659-1992 | Thermoplastic valves-fatigue strength-test methods |
| 49 | BS EN 60534-2-1-1999 | Industrial process control valve. Flow capacity. Liquid flow scale equation under installation conditions |
| 50 | BS EN 60534-2-3-1998 | Industrial process control valves. Flow rates. Test procedures |
| 51 | BS EN 60534-2-5-2003 | Industrial process control valves. Flow capacity. Calibration formula for fluid flow through multi-stage control valves with inter-stage recovery function |
| 52 | BS EN 60534-3-1-2000 | Industrial process control valves. Dimensions. Face-to-face dimensions of two-way, ball, and vertical control valves with flanges and two-way, ball, and angle control valves with flanges |
| 53 | BS EN 60534-3-2-2001 | Industrial process control valves. Dimensions. End face distance of rotary control valves other than butterfly valves |
| 54 | BS EN 60534-3-3-1998 | Industrial process control valves. Dimensions. Butt welding, two-way, spherical, vertical mode control valve end-to-end size |
| 55 | BS EN 60534-6-1-1998 | Industrial process control valves. Installation components for connecting control valve regulators. Installation of regulators on linear actuators |
| 56 | BS EN 60534-6-2-2001 | Industrial process control valves. Installation instructions for positioners installed on control valves. Positioners installed on rotary transmission devices |
| 57 | BS EN 60534-8-1-2001 | Industrial process control valves. Noise problems. Laboratory measurement of dynamic noise through control valves |
| 58 | BS EN 60534-8-3-2000 | Industrial process control valves. Noise problems. Aerodynamic noise forecasting methods for control valves |
| 59 | BS EN 60534-8-4-1994 | Industrial process control valves. Part 8: Noise problems. Section 4. Prediction of noise generated by flow |
| 60 | BS EN ISO 5211：2001 | Industrial valves—part-turn actuator accessories |
| 61 | BS EN ISO 10432-2000 | Petroleum and natural gas industry. Downhole equipment. Underground safety valve equipment |
| 62 | BS EN ISO 14723:2002 | Petroleum and natural gas industry-pipeline transmission system-subsea pipeline valve |
| 63 | BS EN ISO 15761-2003 | Steel gate valves, ball valves and check valves in sizes DN 100 and smaller for the oil and gas industry |
| 64 | BS ISO 4401-1996 | Hydraulic transmission. Four-port directional control valve. Assembly surface |
| 65 | BS ISO 5599-1-2001 | Pneumatic and hydraulic. Five-way directional control valve. Mounting interface surface without electrical connector |
| 66 | BS ISO 5599-2-2001 | Pneumatic hydraulic. Five-way directional control valve. Optional electrical connector installation interface surface |
| 67 | BS ISO 5781-2000 | Hydraulic transmission. Pressure reducing valve, sequence valve, unloading valve, throttle valve and check valve. Mounting surface |
| 68 | BS ISO 6263-1997 | Hydraulic transmission. Compensating flow control valve. Assembly surface |
| 69 | BS ISO 6264-1998 | Hydraulic transmission. Pressure reducing valve. Assembly surface |
| 70 | BS ISO 7790-1998 | Hydraulic transmission. Standard design stack valve with four ports and four port directional control valve with specifications of 03 and 05. Tightening dimensions |
| 71 | BS ISO 10770-1-1998 | Hydraulic transmission. Electric mode hydraulic control valves. Part 1: Test methods for four-way flow control valves |
| 72 | BS ISO 10770-2-1998 | Hydraulic transmission. Electric mode hydraulic control valves. Part 2: Test methods for three-way flow control valves |
| 73 | BS ISO 11727-1999 | Pneumatic fluid mechanics. Control valves and other components of control mechanisms and valve identification |
| 74 | BS ISO 12238-2001 | Pneumatic and hydraulic. Direction control valve. Measurement of conversion time |
| 75 | BS ISO 15218-2003 | Pneumatic hydraulic transmission. 3/2 solenoid valve. Installation interface surface |
| 76 | BS ISO 15407-1-2000 | 18mm and 26mm five-port pneumatic directional control valve. Installation interface without electric plug |
| 77 | BS ISO 15407-2-2003 | Pneumatic transmission. Five-port directional control valve, specifications 18mm and 26mm. Installation interface with optional electrical connectors |
| 78 | BS 970T4-1970 | Valve steel |
| 79 | BS 1010-2-1973 | Specification for discharge cock and shut-off (spinning) valve for water supply and drainage facilities. Part 2: Discharge cock and shut-off valve for ground use |
| 80 | BS 1123-1976 | Safety valves, instruments and other safety accessories for gas storage tanks and air pressure equipment |
| 81 | BS 1123-1-1987 | Safety valves, meters and fusible plugs for compressed air or inert gas installations. Part 1: Installation instructions |
| 82 | BS 1212-1979 | Fixed ball valve (Portsmouth type) |
| 83 | BS 1414-1975 | Specification for steel wedge gate valve (with flange and butt welding end) for petroleum, petrochemical and similar industries |
| 84 | BS 1415-1975 | The first part of the batching valve Non-constant temperature and no compensation batching valve |
| 85 | BS 1552-1995 | Specification for manual shut-off valves for type 1, type 2 and type 3 gas |
| 86 | BS 1570 | Flange and butt-welded steel plug valves for the petroleum industry (excluding wellhead valves and self-blow valves) |
| 87 | BS 1655-1980 | Structural length of automatic regulating valve with flange connection for petroleum industry |
| 88 | BS 1735 | Petroleum industry Use 125-pound class 1.5″-24″ flange connection rising rod wedge cast iron gate valve |
| 89 | BS 1868 | Petroleum, petrochemical and related industries with flanges and butt-welded connection steel check valves |
| 90 | BS 1873-1975 | Petroleum, petrochemical and related industries with flanges and butt welding connection steel globe valves and check valves |
| 91 | BS 1952 | General purpose copper alloy gate valve |
| 92 | BS 1953 | Commonly used copper alloy check valve |
| 93 | BS 1968 | Copper alloy float ball valve |
| 94 | BS 2060 | Generally use threaded connection copper alloy globe valve |
| 95 | BS 2080-1974 | Structural length of flanges and butt-welded connection valves for petroleum, petrochemical and related industries |
| 96 | BS 2591 PT.1 | Terminology for valves and valve parts Part 1: Globe valves, check valves and gate valves with internal threaded connections |
| 97 | BS 2591 PT.2 | Terminology of Valves and Valve Parts Part 2: Safety Valves and Safety Valves |
| 98 | BS 2591PT.3 | Terminology for valves and valve parts Part 3: Plug valves |
| 99 | BS 2591PT.4 | Terminology of Valves and Valve Parts Part 4: Butterfly Valves |
| 100 | BS 2591PT.5 | Terminology of Valves and Valve Parts Part 5: Ball Valves |
| 101 | BS 2995 | Cast steel and forged steel gate valves, globe valves, check valves and plug valves with threaded and socket welded connections of less than 2″ in the petroleum industry |
| 102 | BS 3457-1973 | Specification for gasket material for faucet and shut-off valve seat |
| 103 | BS 3464 | General purpose cast iron gate valve |
| 104 | BS 3808 | Cast steel and forged steel wedge gate valves with flanges, threaded and socket welded connections less than 2″ for the petroleum industry |
| 105 | BS 3948 | Parallel gate valve made of cast iron for general use |
| 106 | BS 3952 | General purpose cast iron butterfly valve |
| 107 | BS 3961 | Commonly threaded cast iron globe valves and globe check valves |
| 108 | BS 4062T-1982 | Hydraulic control valve test |
| 109 | BS 4090 | Generally used cast iron check valve |
| 110 | BS 4133 | Generally flanged steel parallel gate valve |
| 111 | BS 4151-1967 | Evaluation method of pneumatic valve positioner with input signal of 3 to 15 lb/in (pressure gauge) |
| 112 | BS 4312 | Steel globe valves and globe check valves generally connected by flanges |
| 113 | BS 4460 | Steel ball valve for petroleum industry |
| 114 | BS 5146-1984 | Inspection and testing of steel valves for petroleum, petrochemical and related industries |
| 115 | BS 5150-1974 | Generally used cast iron wedge single gate or double gate valve |
| 116 | BS 5151-1974 | Parallel gate valve made of cast iron for general use |
| 117 | BS 5152-1974 | Generally used cast iron globe valve and globe check valve |
| 118 | BS 5153-1974 | Generally used cast iron check valve |
| 119 | BS 5154-1974 | Generally use copper alloy globe valves, globe check valves, check valves and gate valves |
| 120 | BS 5155-1974 | General purpose cast iron and carbon steel butterfly valves |
| 121 | BS 5156-1985 | Diaphragm valve for general use |
| 122 | BS 5157-1984 | General purpose steel parallel gate valve |
| 123 | BS 5158-1989 | Cast iron plug valve |
| 124 | BS 5159-1974 | Cast iron and carbon steel ball valves for general use |
| 125 | BS 5160-1974 | Generally used flanged steel globe valves, globe check valves and lift check valves |
| 126 | BS 5163-1986 | Technical conditions of gate valve for water supply system |
| 127 | BS 5351-1976 | Steel ball valves for petroleum, petrochemical and related industries |
| 128 | BS 5352-1981 | Wedge steel valves, ball valves and check valves of less than 50mm for petroleum, petrochemical and related industries |
| 129 | BS 5353-1989 | Technical specifications for plug valves |
| 130 | BS 5417-1976 | General industrial valve test |
| 131 | BS 5418-1979 | Symbols for general industrial valves |
| 132 | BS 5433-1980 | Technical specification for underground gate valve for water supply |
| 133 | BS 5793-4-1987 | Industrial process control valves. Part 4: Inspection and routine test specifications |
| 134 | BS 5793-5-1984 | Industrial process control valves. Part 5: Marking specifications |
| 135 | BS 5944-4-1984 | Measurement of air noise generated by hydraulic power systems and components. Part 4: Measurement method of sound power level of flow and pressure control valves |
| 136 | BS 6023-1980 | Vocabulary of technical terms for automatic traps |
| 137 | BS 6283-2-1991 | Safety and control devices used in hot water systems. Pressure range from 1bar to 10bar temperature relief valve specification |
| 138 | BS 6283-4-1991 | Safety and control devices used in hot water systems. Part 4: The maximum supply pressure is 12bar, and the standard size includes DN50 micro tension pressure reducing valve specifications |
| 139 | BS 6364-1984 | Low temperature valve |
| 140 | BS 6494-4-1989 | The mounting surface of hydraulic valves. Part 4: Specification for clamping dimensions of four-hole assembly exhaust valves, modular valve and directional control valves of 03 and 05 specifications |
| 141 | BS 6683-1985 | Valve installation and use |
| 142 | BS 6755-1986 | Part 1: Valve test Product pressure test requirements |
| 143 | BS 6755-1987 | Part 2: Valve test and fire resistance test requirements |
| 144 | BS 6759-1-1984 | Safety valves. Part 1: Specification for safety valves for steam and hot water |
| 145 | BS 6759-2-1984 | Safety valves. Part 2: Specification for safety valves for inert gas or compressed air |
| 146 | BS 6759-3-1984 | Safety valves. Part 3: Specification for safety valves for working fluids |
| 147 | BS 7438-1991 | Specification for spring-loaded steel and copper alloy single-disc compression check valves |
| 148 | BS 7461-1991 | Specification for electric automatic gas shut-off valve with flow regulator, closed circuit switch indication, closed position indicator switch or gas flow control |
| 149 | BS/MA 65-76Pt.10 | Butterfly valve |
| 150 | BS/MA 65-76Pt.11 | Diaphragm valve |
| 151 | prEN 593-2003 | Industrial Valve Metal Butterfly Valve |
| 152 | prEN 13327-1998 | Industrial valves Thermoplastic check valves |
| 153 | prEN 13959-2000 | Anti-pollution control valve with nominal pressure from DN6 to DN250 (including DN250) E Group A, B, C and D type |
| 154 | prEN 14071-2000 | Pressure reducing valve for liquefied petroleum gas (LPG) tanks and auxiliary equipment |
| 155 | prEN 45512-1994 | Purchasing Guide Piping systems and valves Boiler and high-pressure pipeline valves including safety valves |
| 156 | prEN 60534-4-1998 | Industrial Process Control Valve “Part 4: Inspection and Routine Test” Draft |
| 157 | prEN ISO 4126-1-2003 | Safety device to prevent overpressure protection Part 1: Safety valve |
| 158 | prEN ISO 4126-4-2003 | Safety equipment to protect extra pressure” Part 4: Pilot operating safety valve |
| 159 | PrEN ISO 10434-2002 | Bolt cap steel gate valve for oil and gas industry |
| 160 | prEN ISO 16135-2001 | Industrial valve Thermoplastic material ball valve |
| 161 | prEN ISO 16136-2001 | Industrial valve Thermoplastic material butterfly valve |
| 162 | prEN ISO 16138-2001 | Industrial valve Thermoplastic diaphragm valve |
| 163 | PrEN ISO 16139-2000 | Industrial valve gate valve made of thermoplastic material |
| 164 | prEN ISO 17292-2002 | Metal ball valves for petroleum, petrochemical and related industries |
| 165 | prEN ISO 21787-2001 | Industrial Valve Thermoplastic Ball Valve |
| 166 | EN 19-2002 | Industrial Valve-Metal Valve Sign |
| 167 | EN161-2001 | Automatic shut-off valve for gas burners and gas appliances |
| 168 | EN 1349-2000+AC-2001 | Industrial Process Control Valve |
| 169 | EN 12094-13-2001+AC-2002 | Fixed fire-fighting system “Parts of gas fire extinguishing system” Part 13: Requirements and test methods for non-return valves and non-return valves |
| 170 | EN 12288-2003 | Industrial valves Copper alloy gate valves |
| 171 | EN 12334-2001 | Industrial valve cast iron check valve |
| 172 | EN 13709-2002 | Industrial valves Steel ball and ball check valves |
| 173 | EN 13789-2002 | Industrial Valve Cast Iron Globe Valve |
| 174 | EN 26553-1991 | Automatic steam trap logo |
| 175 | EN 26554-1991 | Flange connection automatic steam trap structure length |
| 176 | EN 26704-1991 | Automatic steam trap classification |
| 177 | EN 26948-1991 | Automatic steam trap product test and performance test |
| 178 | EN 27841-1991 | Measurement of air leakage of automatic steam trap valve |
| 179 | EN 27842-1991 | Automatic steam trap valve drainage measurement |
| 180 | EN 60534-1-1993 | Industrial Process Control Valve “Part 1” Control Valve Terminology and General Considerations |
| 181 | EN 60534-3-2-2001 | Industrial Process Control Valves” Part 3: Dimensions” Section 2: Flangeless control valves (except thin butterfly valves) end face spacing dimensions |
| 182 | EN 60534-8-2-1993 | Industrial Process Control Valves “Part 8″ Noise Considerations” Section 2 Laboratory Measurements of Noise Generated by Fluid Passing Control Valves |
DIN German National Standard for Valves
| NO. | Standard code | Standard name |
| BS EN | ||
| 1 | DIN 477-4-1982 | Cylinder valve. Lightweight check valve for bottleneck of gas storage |
| 2 | DIN 2527:1992 | Flange cover (PN=0.5-10.0MPa) |
| 3 | DIN 2543-2549:1997 | Cast steel integral flange (PN=1.6-25.0MPa) |
| 4 | DIN 2566:1975 | Threaded flange (PN=1.0, 1.6MPa) |
| 5 | DIN 2573:1975 | Plate flat welding flange (PN=0.6-1.0MPa) |
| 6 | DIN 2576:1975 | Plate flat welding flange (PN=0.6-1.0MPa) |
| 7 | DIN 2628-2629：1975 | Neck welding flange (PN=0.25-25.0MPa) |
| 8 | DIN 2633-2637） | Cast iron flange |
| 9 | DIN 2638-1975 | Neck welding flange (PN=0.25~25.0MPa) |
| 10 | DIN 2641-1975 | Flanging ring plate loose flange (PN=0.6,1.0MPa) |
| 11 | DIN 2642-1975 | Flanging ring plate loose flange (PN=0.6,1.0MPa) |
| 12 | DIN 2655-1975 | Flat welded ring plate type loose flange (PN=0.25-4.0MPa) |
| 13 | DIN 2656-1975 | Flat welded ring plate type loose flange (PN=0.25-4.0MPa) |
| 14 | DIN 2673-1975 | Neck butt weld ring plate loose flange (PN=1.0-MPa) |
| 15 | DIN 3160-1974 | Coolant circulation through stop valve with a nominal pressure of 25 |
| 16 | DIN 3161-1974 | Coolant circulation angular stop valve with nominal pressure of 25 |
| 17 | DIN 3163-1974 | Coolant circulation straight-through regulating valve with a nominal pressure of 25 |
| 18 | DIN 3202-1977 | Valve structure length-Part 1: Flange connection valve |
| 19 | DIN 3202-1982 | Valve structure length-Part 2: Welded connection valve |
| 20 | DIN 3202-1979 | Valve structure length-Part 3: Wafer connection valve |
| 21 | DIN 3202-1977 | Valve structure length-Part 4: Internal thread connection valve |
| 22 | DIN 3202-1982 | Valve structure length-Part 5: Pipe thread connection valve |
| 23 | DIN 3211-1977 | Definition of pipeline valve |
| 24 | DIN 3230-1974 | Part 1: Technical Conditions of Valve Supply—Consultation, Ordering and Supply |
| 25 | DIN 3230-1974 | Part 2: Technical Conditions of Valve Supply—General Requirements |
| 26 | DIN 3230-1975 | Part III: Technical Conditions of Valve Supply-Test Summary |
| 27 | DIN 3230-1977 | Part 4: Technical Conditions of Valve Supply—Requirements and Inspection of Valves for Drinking Water Equipment |
| 28 | DIN 3230-1981 | Part 5: Technical Conditions of Valve Supply—Requirements and Inspections of Stop Valves for Gas Pipelines and Gas Equipment |
| 29 | DIN 3247-1985 | Without check valve. Suction filter with flange |
| 30 | DIN 3248-1985 | No check valve. Suction filter with internal thread connection |
| 31 | DIN 3249-1985 | With check valve. Internal thread connection suction filter (foot valve) |
| 32 | DIN 3259-1985 | Flange suction filter with check valve (foot valve) |
| 33 | DIN 3269-1-1988 | Pipe fittings for drinking water installations in lots and buildings. Check valve PN10. Requirements |
| 34 | DIN 3269-2-1988 | Pipe fittings for drinking water installations in lots and buildings. Check valve PN10. Inspection |
| 35 | DIN 3320-1983 | Safety valve concept, size determination, marking |
| 36 | DIN 3352-1979 | Part 1: General requirements for gate valves |
| 37 | DIN 3352-1979 | The second part: Cast iron metal sealed concealed stem gate valve |
| 38 | DIN 3352-1980 | Part 3: Cast iron metal sealed rising stem gate valve |
| 39 | DIN 3352-1980 | Part 4: Cast iron soft-seal concealed stem gate valve |
| 40 | DIN 3352-1980 | Part VIII: Rising stem type low temperature resistant steel valve |
| 41 | DIN 3354-1982 | Part 4: Butterfly Valve General Situation |
| 42 | DIN 3356-1982 | Part 1: General requirements for valves |
| 43 | DIN 3356-1-1982 | Butterfly valve. General data |
| 44 | DIN 3356-1982 | Part 2: Cast iron globe valve |
| 45 | DIN 3356-1982 | Part Three: Alloy Steel Globe Valve |
| 46 | DIN 3356-1982 | Part 4: Heat-resistant steel globe valve |
| 47 | DIN 3356-1982 | Part Five: Stainless Steel Globe Valve |
| 48 | DIN 3388-1978 | Part 1: Waste gas valve for thermal control gas stove |
| 49 | DIN 3388-1979 | Part 2: Waste gas valve for mechanically controlled gas stove |
| 50 | DIN 3392-1971 | Gas pressure regulating valve for gas consuming equipment |
| 51 | DIN 3394-3-2004 | Automatic control valve. Part 3: Class 0 pressure reducing safety valve with a pressure of 4 bar and below |
| 52 | DIN 3399-1986 | Low pressure shut-off valve-safety technical requirements and inspection |
| 53 | DIN 3430-1986 | Valves for gas supply equipment Angle type globe valve |
| 54 | DIN 3431-1986 | Valve for air supply equipment Angle screw connection ball valve |
| 55 | DIN 3432-1986 | Valves for air supply equipment Straight through spiral ball valves |
| 56 | DIN 3441-3-1984 | |
| 57 | DIN 3441-1977 | Part 2: Valve size of rigid polyvinyl chloride |
| 58 | DIN 3441-1977 | Part 3: Valves made of rigid polyvinyl chloride Diaphragm valve dimensions |
| 59 | DIN 3441-1981 | Part 4: Dimensions of the valve made of hard polyvinyl chloride |
| 60 | DIN 3441-5-1984 | Non-plasticized PVC pipe fittings. Compression check valves PN6 and PN10. Dimensions |
| 61 | DIN 3532-1981 | Pipe fittings for gas installations. Globe valves |
| 62 | DIN 3538-1986 | Gas fittings. Check valves. Female threaded joints |
| 63 | DIN 3546-1-2002 | Shut-off valves for water supply installations in buildings. Part 1: Manual piston type door valves for drain valves, gate valves and diaphragm valves, general requirements and inspections for shut-off valves and pistons. DV |
| 64 | DIN 3548-1-1993 | With flange and trap |
| 65 | DIN 3680-1976 | System and definition of traps |
| 66 | DIN 3684-1977 | The connection size of the trap with a threaded connection at the inlet of the trap and a threaded sleeve at the outlet |
| 67 | DIN 3841-1981 | Heating valve, heater valve, nominal pressure PN0.1～1.6MPa |
| 68 | DIN 3844-1981 | Heating equipment valve PN1.6MPa copper alloy brake valve thrust screw |
| 69 | DIN 3845-1981 | Heating equipment valve PN1.6MPa copper alloy check valve thrust screw |
| 70 | DIN 4056-1992 | Water pipes. Road covers for underground stop valves on streets. DVGW technical specifications |
| 71 | DIN 4817-1-1981 | Stop valve for liquid gas. Concept. Safety technical requirements. Inspection. Marking |
| 72 | DIN 5589-1990 | Compressed air devices for rail vehicles. Safety valves. Installation and connection dimensions. Requirements |
| 73 | DIN 5593-1994 | Compressed air devices for rail vehicles. Check valves. Installation and connection dimensions |
| 74 | DIN 5594-1994 | Compressed air devices for rail vehicles. Double check valves. Installation and connection dimensions |
| 75 | DIN 11832-1-1990 | Farm and livestock breeding equipment. Valves and fittings for pipelines conveying liquid manure. Static pressure gate valves up to 1 bar |
| 76 | DIN 17480-1984 | Technical delivery conditions for valve materials |
| 77 | DIN 25418-1976 | Materials, manufacturing and testing of valves in atomic equipment |
| 78 | DIN 32730-1993 | Control valves with safety functions for water and steam in heating installations. Safety technical requirements and inspections |
| 79 | DIN 42568-1982 | Transformers. Gate valves with nominal inner diameters of 15 and 32 for taking oil samples and draining oil |
| 80 | DIN 58362-7-2002 | Infusion. Infusion set and accessories. Part 7: Check valve |
| 81 | DIN 58600-2003 | Respiratory protector. The plug connection between the self-adjusting oxygen demand oxygen regulating valve for the German fire brigade and the mask of an independent open-circuit compressed air respirator |
| 82 | DIN 74279-1977 | Relief valve of compressed air brake system |
| 83 | DIN 74280-1998 | Air brake system. Check valve |
| 84 | DIN 83409-1987 | Airtight ventilation valve |
| 85 | DIN 85003-3-1997 | Technical delivery conditions for pipe fittings for shipbuilding. Part 3: Butterfly valves |
| 86 | DIN 85003-4-1997 | Technical delivery conditions for pipe fittings for shipbuilding. Part 4: Globe valves |
| 87 | DIN 85003-5-1997 | Technical delivery conditions for pipe fittings for shipbuilding. Part 5: Stop check valve |
| 88 | DIN 85003-6-1997 | Technical delivery conditions for pipe fittings for shipbuilding. Part 6: Manual shut-off valves |
| 89 | DIN 85003-7-1997 | Technical delivery conditions for shipbuilding pipe fittings. Part 7: Diaphragm valves |
| 90 | DIN 86066-2002 | Cast steel welded elbow for check valve. DN50 to 150, PN10 flange joint |
| 91 | DIN 86251-1998 | DN15 to 500 flanged globe valve made of cast iron for shipbuilding |
| 92 | DIN 86252-1998 | Cast iron lockable check valve with flange DN15 to 500 for shipbuilding |
| 93 | DIN 86254-2000 | Ship and shipbuilding technology. Ultra-light globe valve DN32-DN125 (PN10) |
| 94 | DIN 86259-2000 | Ship and shipbuilding technology. Ultra-light flange gate valve DN32-DN125 (PN10) |
| 95 | DIN 86260-1998 | Gunmetal globe valve with flange DN15 to 500 for shipbuilding |
| 96 | DIN 86261-1998 | Gunmetal lockable check valve with flange DN15 to 500 for shipbuilding |
| 97 | DIN 86262-1974 | DN20～300mm, PN1.6MPa gunmetal flange connection type non-stop check valve |
| 98 | DIN 86266-2002 | Ships and marine technology. Ultra-light flanged globe valves clamped by hand and flanged |
| 99 | DIN 86500-1968 | Overview of globe valves and gate valves for marine threaded connections |
| 100 | DIN 86510-1973 | Gunmetal threaded bonnet globe valve with non-welded annular bushing type joint |
| 101 | DIN 86511-1973 | Gunmetal threaded bonnet globe valve with brazed 25° tapered bushing sleeve joint |
| 102 | DIN 87101-1975 | Vertical type. Nominal width 50-150. Nominal pressure 1. Self-closing check valve. Flange connection that meets the nominal pressure |
| 103 | DIN 87102-1975 | DIN87101 check valve housing |
| 104 | DIN 87103-1975 | DIN87101 check valve cover |
| 105 | DIN 87104-1975 | Valve insert for DIN87101 check valve |
| 106 | DIN 87105-1975 | Locking screw with shoulder for DIN87101 check valve |
| 107 | DIN 87106-1975 | Positioning device for DIN87101 check valve |
| 108 | DIN 87107-1975 | Flat washer for DIN87101 check valve |
| 109 | DIN 87901-2001 | Two-way safety valve for pump |
| 110 | DIN EN 1074-3-2000 | Valves for water supply. Applicability requirements and special inspection tests. Part 3: Check valves |
| 111 | DIN EN 1074-5-2001 | Water supply valves. Applicability requirements and adaptation tests. Part 5: Control valves |
| 112 | DIN EN 1171-2003 | Industrial valves. Cast iron gate valves |
| 113 | DIN EN 1213-1999 | Building valves. Copper alloy shut-off valves for drinking water supply in buildings. Tests and requirements |
| 114 | DIN EN 1349-2000 | Industrial process control valve |
| 115 | DIN EN 1489-2000 | Building valves. Pressure safety valves. Tests and requirements |
| 116 | DIN EN 1491-2000 | Building valves. Expansion valves. Tests and requirements |
| 117 | DIN EN 1567-2000 | Building valves-water pressure reducing valves and combined water pressure reducing valves-requirements and tests |
| 118 | DIN EN 1643-2001 | Valve inspection system for automatic shut-off valves for gas burners and gas appliances |
| 119 | DIN EN 12094-13-2001 | Stationary fire fighting systems. Components for gas fire extinguishing systems. Part 13: Requirements and test methods for check valves and non-check valves |
| 120 | DIN EN 12334-2001 | Industrial valves. Cast iron control valves |
| 121 | DIN EN 13397-2002 | Industrial valves. Diaphragm valves made of metal materials |
| 122 | DIN EN 13648-1-2002 | Condensation vessels. Protection against overpressure. Part 1: Safety valves for condensing equipment |
| 123 | DIN EN 13709-2003 | Industrial valves. Steel ball valves, ball globe valves and check valves |
| 124 | DIN EN 13953-2003 | Pressure reducing valve for transportable refillable cylinders for liquefied petroleum gas (LPG) |
| 125 | DIN EN 26554-1991 | Flange connection traps. Structural length (ISO6554-80) |
| 126 | DIN EN 26704-1991 | Automatic trap. Classification |
| 127 | DIN EN 26948-1991 | Automatic trap. Production inspection and performance characteristic inspection. (ISO6948-81) |
| 128 | DIN EN 27841-1991 | Automatic traps. Determination of steam loss. Inspection methods. (ISO7841-88) |
| 129 | DIN EN 27842-1991 | Automatic traps. Flow measurement. Test methods. (ISO7842-88) |
| 130 | DIN EN 60534-1-1995 | Industrial process control valves. Part 1: Control valve terms and general principles |
| 131 | DIN EN 60534-2-1-2000 | Industrial process control valves. Part 2-1: Flow capacity. The dimensional equation of fluid flow under installation conditions |
| 132 | DIN EN 60534-2-3-1998 | Industrial process control valves. Part 2-3: Flow. Inspection methods |
| 133 | DIN IEC 60534-2-4-1990 | Industrial process control valve. Part 2: Flow capacity. Section 4: Intrinsic flow characteristic line and adjustment ratio relationship |
| 134 | DIN EN 60534-3-1-2000 | Industrial process control valves. Part 3-1: Dimensions. Face-to-face dimensions of two-way ball type vertical control flange valves and the center of two-way ball type angle control flange valves |
| 135 | DIN EN 60534-3-2-2002 | Industrial process control valves. Part 3-2: Dimensions. Dimensions of end face spacing for flangeless control valves (except thin butterfly valves) (IEC60534-3-2:2001) |
| 136 | DIN EN 60534-3-3-2000 | Industrial process control valves. Part 3-3: Dimensions. Butt welded butt joint size, two ways, ball type, right angle type control valve |
| 137 | DIN IEC 60534-5-1984 | Industrial process control valves. Part 5: Marking |
| 138 | DIN EN 60534-6-1-1998 | Industrial process control valves. Part 6: Installation details for fixing the position regulator of the regulating valve drive. Section 1: Installation of the position regulator on the stroke drive |
| 139 | DIN EN 60534-6-2-2001 | Industrial process control valves. Part 6-2: Installation rules for positioners installed on control valves. Positioners installed on rotary transmission devices |
| 140 | DIN IEC 60534-7-1992 | Industrial process control valves. Part 7: Data sheet |
| 141 | DIN EN 60534-8-1-2001 | Industrial process control valves. Part 8: Noise issues. Section 1: Laboratory measurement of noise generated by aerodynamic flow through the control valve |
| 142 | DIN EN 60534-8-2-1994 | Industrial process control valves. Part 8: Noise issues. Section 2: Laboratory measurement of noise generated by hydraulic flow through the control valve |
| 143 | DIN EN 60534-8-3-2001 | Industrial process control valves. Part 8-3: Noise problems. Control valve aerodynamic noise prediction method |
| 144 | DIN EN 60534-8-4-1995 | Industrial process control valves. Part 8: Noise state. Section 4. Prediction of noise generated by flow |
| 145 | DIN ISO 5599-1-1998 | Pneumatic and hydraulic. Five-way directional control valve. Part 1: Mounting interface surface without electrical connections |
| 146 | DIN ISO 6553-1981 | Automatic trap. Sign |
| 147 | DIN ISO 15407-1-2003 | Pneumatic transmission. Five-port directional control valve, specifications 18mm and 26mm. Part 1: Mounting surface without electrical connectors |
| 148 | DIN EN ISO 10432-2000 | Petroleum and natural gas industry. Downhill tunnel equipment. Underground safety valve specification |
| 149 | DIN EN ISO 15761-2003 | Steel gate valves, ball valves and check valves for the oil and gas industry with specifications of DN100 and smaller |
rOCT Former Soviet Union National Standard for Valves
| NO. | Standard code | Standard name |
| rOCT | ||
| 1 | rOCT – 3326 – 86 | Stop valve, lift and swing check valve structure length |
| 2 | rOCT – 3706 – 83 | Flange connection or welded cast gate valve structure length |
| 3 | rOCT – 5548 – 70 | Steel angle type full open main safety valve |
| 4 | rOCT – 5761 – 74 | Technical conditions of PN 4 250kg£/cm2 globe valve |
| 5 | rOCT – 5762 – 74 | PN 4 25056£/9:2 gate valve technical conditions |
| 6 | rOCT – 8437 – 75 | #!105″/9:2 cast iron flange connection rising stem parallel gate valve |
| 7 | rOCT – 9919 – 75 | PN10 and 40kg^cm2 cast iron flange connection concealed rod wedge gate valve |
| 8 | rOCT – 10019 – 74 | PN16kgf/cm2 steel flange connection micro-open spring safety valve |
| 9 | rOCT – 10042 – 75 | PN25kgf/cm2 cast iron dark rod gate valve |
| 10 | rOCT – 10094 – 75 | PN25kgf/cm2 straight-through and angle-type globe valve for ammonia |
| 11 | rOCT – 10194 – 78 | PN16kg£/cm2 steel flange connection rising rod wedge gate valve |
| 12 | rOCT – 10371 – 77 | PN25kgf/cm2 steel flange connection foot valve |
| 13 | rOCT – 10421 – 75 | PN10kgf/cm2 steel globe valve |
| 14 | rOCT – 10640 – 75 | PN320kgf/cm2RN3~125mm flange connection angle globe valve |
| 15 | rOCT – 10738 – 76 | Type and basic dimensions of PN25kgf/cm2 steel flange connection or welding rising rod wedge gate valve |
| 16 | rOCT – 10819 – 75 | Grey cast iron and malleable cast iron threaded bonnet for PN10 and 16kg£/cm2 lift check valve Structural ruler |
| 17 | rOCT – 10821 – 75 | Bolted bonnet structure of malleable cast iron for PN25 and 140kg£/cm2 lift check valve |
| 18 | rOCT – 11471-72 | General purpose pipeline accessories, g25kgf/cm2 with threaded bonnet, malleable cast flange connection globe valve |
| 19 | rOCT – 11823-74 | !N25kgf/cm2 gray cast iron and malleable cast iron lift check valve technical conditions |
| 20 | rOCT – 12010 – 75 | !N4kgf/cm2 malleable cast iron flange connection rising rod wedge type double gate valve structure size |
| 21 | rOCT – 12154 – 74 | PN1kgf/cm2 brass unfilled straight-through plug valve |
| 22 | rOCT – 12532 – 79 | Direct acting safety valve type and basic parameters |
| 23 | rOCT – 12674 – 73 | !Brass diaphragm globe valve for N16kg/cm2 Freon |
| 24 | rOCT – 12678 – 80 | Basic parameters of pressure regulating valve |
| 25 | rOCT – 12815 – 80 | Flange fit, type, connection size and sealing surface size for valves and pipes with pressure from 0.1 to 20MPa |
| 26 | rOCT – 12816-80 | General technical requirements for flanged valves and pipelines with pressure from 0.1 to 20 MPa |
| 27 | rOCT – 12848 – 76 | !N4kgf/cm2 Bellows Angle Globe Valve |
| 28 | rOCT – 13547 – 79 | PN16kgf/cm2 butterfly valve |
| 29 | rOCT – 14189-81 | Design length of plug valve |
| 30 | rOCT – 14715 – 77 | Basic parameters of manual through stop valve |
| 31 | rOCT – 14716 – 77 | Basic parameters of electric through globe valve |
| 32 | rOCT – 16155 – 70 | PP01kg£/cm2 Brass Straight Through Plug Valve with Spring for Gas Pipeline |
| 33 | rOCT – 16324 – 83 | Pneumatic diaphragm drive cast iron diaphragm regulating valve |
| 34 | rOCT – 18162-72 | PN16kgf/cm2 malleable cast iron internal thread connection globe valve |
| 35 | rOCT – 18163-72 | PN25 and 40kg^cm2 malleable cast iron flange connection globe valve |
| 36 | rOCT – 18581 -73 | PN40kgf/cm2 corrosion-resistant steel single flap swing check valve |
| 37 | rOCT – 18584 – 73 | P$160kg£/cm2 steel single flap swing check valve |
| 38 | rOCT – 19500 – 74 | PG16kg£/cm2 thread and flange connection gray iron lift check valve |
| 39 | rOCT – 19501 – 74 | P%16, 25kgf/cm2 threaded and flanged malleable cast iron lift check valve |
| 40 | rOCT – 19827 – 74 | PN10 and 16kg£/cm2 cast iron single swing check valve |
| 41 | rOCT – 19192 – 74 | P”40kgf/cm2 flange and welding connection stop valve |
| 42 | rOCT – 19193 – 73 | !”10kgf/cm2 cast iron flange or threaded connection with filler straight-through plug valve |
| 43 | rOCT – 20294 – 74 | Pg 16kgf/cm2 flange connection acid-resistant steel valve |
| 44 | rOCT – 20336 – 74 | P#25kg^cm2 concealed rod wedge gate valve |
| 45 | rOCT – 20770 – 75 | Pg40kg£/cm2 steel flange connection and welding connection lift check valve |
| 46 | rOCT – 22222 – 76 | Basic parameters of sealing valve |
| 47 | rOCT – 22513 – 77 | Basic parameters of check valve |
| 48 | rOCT – 23229 – 78 | Py = 4MPa (40kg£/cm2) corrosion-resistant steel globe valve technical conditions |
| 49 | rOCT – 23230 – 78 | Pg 16kg£/cm2 steel globe valve |
| 50 | rOCT – 23866 – 87 | Basic parameters of single-seat and double-seat cage control valves |
| 51 | rOCT – 25923 – 89 | Basic parameters of butterfly control valve |
NF French National Standard for Valves
| NO. | Standard code | Standard name |
| NF | ||
| 1 | E29 -306-83 | Valve terms and definitions |
| 2 | E29 – 312 – 84 | Industrial valves, the definition, calculation and actual measurement methods of valve flow and flow resistance coefficient |
| 3 | E29 – 323 – 85 | Industrial valve-Flange connection cast iron gate valve ISO P”10, 16 for ground facilities |
| 4 | E29 – 324 – 89 | Industrial valve-Flange connection cast iron gate valve for underground installations |
| 5 | E29 – 327 – 85 | Industrial valve cast steel gate valve ISO PN16, 20, 25, 40, 50, 100 |
| 6 | E29 – 328 – 89 | Industrial valve-forged steel or forged welded gate valve |
| 7 | E29 – 332 – 75 | Industrial valve copper alloy threaded connection gate valve PN10 |
| 8 | E29 – 335 – 75 | Industrial Valve Flange Connection Jacketed Stainless Steel Gate Valve Series P”6~ 160 |
| 9 | E29 – 337 – 75 | Industrial valve one ISO bar series, nominal pressure PN10-64 flange connection, jacket stainless steel gate valve |
| 10 | E29 – 350 – 87 | Industrial Valve-Technical Specification for Steel Globe Valves (and Throttle Valves) |
| 11 | E29 – 354 – 87 | Industrial valve a cast iron globe valve (and other forms of globe valve) technical conditions |
| 12 | E29 – 358 – 87 | Industrial valve-flange connection steel globe valve and lift check valve nominal pressure! “64 a 100 |
| 13 | E29 – 359 – 73 | Industrial valve-flange connection steel globe valve and lift check valve nominal pressure PN100 |
| 14 | E29 – 371 – 84 | Industrial valve-flange connection iron swing check valve ISO! “10, 16, 25, 40, 20FT, 50FT |
| 15 | E29 – 373 – 84 | Industrial valve flange connection steel swing check valve ISO! “16, 20, 25, 40, 50, 100 |
| 16 | E29 – 376 – 81 | Industrial valve flange connection steel swing check valve! “100 |
| 17 | E29 – 410 – 90 | Technical term definition of industrial valve safety valve |
| 18 | E29-411-88 | Industrial valve safety valve general design, displacement calculation, test, marking, package |
| 19 | E29 – 412 – 90 | Industrial valve safety valve performance and displacement test |
| 20 | E29-413-89 | Calculation method of industrial valve safety valve displacement |
| 21 | E29 – 414 – 84 | The relationship between industrial valve safety valve structure length and temperature and pressure |
| 22 | E29 – 415 – 90 | Valve safety valve G2 type safety valve gas volume equal to the calculation of flow |
| 23 | E29 – 420 – 85 | Safety valve technical specifications and reliability certification |
| 24 | E29 – 430 – 89 | Technical specifications for general butterfly valves for industrial valves |
| 25 | E29-431 -88 | Specification for butterfly valves for underground pipelines |
| 26 | E29 – 444 – 84 | Steam Leakage Test of Automatic Steam Traps |
| 27 | E29 – 470 – 89 | Industrial valve-steel ball valve, specifications |
| 28 | M87 – 150 – 80 | Petroleum industry-the maximum allowable working pressure of valves and flanges at different temperatures |
| 29 | M87 – 401 – 73 | Test and acceptance inspection of valves for petroleum industry |
| 30 | E29 – 307 – 89 | |
| 31 | E29-313-90 | |
| 32 | E29 – 350 – 87 | |
| 33 | E29-311-89 |
JIS Valve Japanese National Standard
| NO. | Standard code | Standard name |
| JIS | ||
| 1 | JIS-B0100-70 | Valve terminology |
| 2 | JIS-B2001 – 87 | Nominal diameter and caliber of valve |
| 3 | JIS-B2002 – 87 | Structural length of the valve |
| 4 | JIS-B2003 – 87 | General inspection rules for valves |
| 5 | JIS-B2004 – 87 | Valve marking rules |
| 6 | JIS-B2005 – 87 | Valve flow coefficient test method |
| 7 | JIS-B2011-88 | Bronze gate valve, globe valve, angle valve and check valve |
| 8 | JIS-B2031 – 86 | Grey cast iron valve |
| 9 | JIS-B2032 – 87 | Wafer type rubber seat butterfly valve |
| 10 | JIS-B2041 – 76 | Cast iron 10kg£/cm2 flanged globe valve |
| 11 | JIS-B2042 – 76 | Cast iron angle globe valve with 10kg£/cm2 flange connection |
| 12 | JIS-B2043 – 76 | Cast iron 10kg£/cm2 flanged concealed stem gate valve |
| 13 | JIS-B2044 – 76 | Cast iron 10kg£/cm2 flanged rising stem gate valve |
| 14 | JIS-B2045 – 76 | Cast iron 10kg^cm2 flanged swing check valve |
| 15 | JIS-B2051 – 86 | 10kgf/cm2 malleable cast iron threaded stop valve |
| 16 | JIS-B2052 – 78 | 10kgf/cm2 malleable cast iron threaded connection gate valve |
| 17 | JIS-B2053 – 78 | 10kgf/cm2 malleable cast iron threaded connection lift check valve |
| 18 | JIS-B2061 – 84 | Water faucet |
| 19 | JIS-B2062 – 74 | Gate valve for water pipe |
| 20 | JIS-B2063 – 87 | Air valve for water pipe |
| 21 | JIS-B2064 – 84 | Butterfly valve for water pipe |
| 22 | JIS-B2071 – 87 | Cast steel flanged valve |
| 23 | JIS-B2072 – 76 | Cast steel angle globe valve with 10kgf/cm2 flange connection |
| 24 | JIS-B2073 – 76 | Cast steel 10kg£/cm2 flanged rising stem gate valve |
| 25 | JIS-B2074 – 76 | Cast steel 20kg£/cm2 flanged swing check valve |
| 26 | JIS-B2081 – 76 | Cast steel 20kg^cm2 flanged globe valve |
| 27 | JIS-B2082 – 76 | Cast steel angle globe valve with 20kg£/cm2 flange connection |
| 28 | JIS-B2083 – 76 | Flanged rising stem gate valve |
| 29 | JIS-B2084 – 76 | Cast iron 20kg^cm2 flanged swing check valve |
| 30 | JIS-B2191 – 84 | Bronze threaded connection plug valve |
| 31 | JIS-B2192 – 77 | Bronze threaded connection stuffing plug valve |
| 32 | JIS-B3372 – 82 | Pressure reducing valve for compressed air |
| 33 | JIS-B8210-86 | Spring-loaded safety valve for steam boiler and pressure vessel |
| 34 | JIS-B8225 – 86 | Method for measuring discharge coefficient of safety valve |
| 35 | JIS-B8244 – 77 | Valve for dissolving acetylene container |
| 36 | JIS-B8245 – 89 | Valves for Liquefied Petroleum Containers |
| 37 | JIS-B8246 – 89 | Valves for high-pressure gas containers |
| 38 | JIS-B8373 – 81 | Two-way solenoid valve for pneumatic |
| 39 | JIS-B8374-81 | Three-way solenoid valve for pneumatic |
| 40 | JIS-B8375 – 81 | Pneumatic four-way and five-way solenoid valve |
| 41 | JIS-B8410-90 | Pressure reducing valve for water |
| 42 | JIS-B8414 – 90 | Safety valve for water heater |
| 43 | JIS-B8471 – 77 | Solenoid valve for water |
| 44 | JIS-B8472 – 78 | Solenoid valve for steam |
| 45 | JIS-B8473 – 88 | Solenoid valve for fuel |
| 46 | JIS-B8651 – 89 | Test method of proportional solenoid pressure reducing valve |
| 47 | JIS-B8654 – 89 | Proportional electromagnetic series flow control valve |
| 48 | JIS-B8655 – 89 | Proportional solenoid type series flow control valve test method |
| 49 | JIS-B8656 – 89 | Proportional electromagnetic bypass directional flow control valve |
| 50 | JIS-B8657 – 89 | Proportional electromagnetic bypass directional flow control valve test method |
| 51 | JIS-B8659 – 89 | Test method of electric hydraulic servo valve |
| 52 | JIS-F3058 – 85 | Cast steel vertical wave check valve |
| 53 | JIS-F3059 – 85 | Bronze spiral cut-off vertical wave check valve |
| 54 | JIS-F3060 – 85 | Cast steel spiral cut-off vertical wave check valve |
| 55 | JIS-F7300 – 89 | Standards for the use of general valves and cocks |
| 56 | JIS-F73006 – 89 | Marine cast iron 5K flange angle valve |
| 57 | JIS-F73007 – 89 | Marine cast iron 10K straight stop valve |
| 58 | JIS-F7353 – 89 | Marine cast iron 5K stop check valve |
| 59 | JIS-F7354 – 89 | Marine cast iron 5K angle check valve |
| 60 | JIS-F7359 – 89 | Marine cast iron 5K lift angle check valve |
| 61 | JIS-F7363 – 89 | Marine Cast Iron 5K Gate Valve |
| 62 | JIS-F7364 – 89 | Marine cast iron 10K gate valve |
| 63 | JIS-F7366 – 89 | Marine cast steel 10K gate valve |
| 64 | JIS-F7371 – 88 | Marine 5K Bronze Swing Check Valve |
| 65 | JIS-F7372 – 89 | Marine cast iron 5K swing check valve |
| 66 | JIS-F7373 – 88 | Marine 10K cast iron swing check valve |
| 67 | JIS-F7376 – 89 | Marine cast iron 10K angle check valve |
| 68 | JIS-F7377 – 89 | Marine cast iron 16K stop check valve |
| 69 | JIS-F7378 – 89 | Marine cast iron 16K angle check valve |
| 70 | JIS-F7398 – 89 | Ship fuel tank automatically closes the drain valve |
| 71 | JIS-F7399 – 89 | Emergency shut-off valve for ship fuel tank |
| 72 | JIS-F7412 – 88 | Marine 5K Bronze Pipe Cap-shaped Spiral Non-Return Coupling Cap-shaped Angle Valve |
| 73 | JIS-F7414 – 88 | Marine 16K Bronze Pipe Cap-shaped Lifting Check Coupling Cap-shaped Angle Valve |
| 74 | JIS-F7416 – 88 | Marine 5K Bronze Pipe Cap-shaped Lifting Check Coupling Cap-shaped Angle Valve |
| 75 | JIS-F7421 – 89 | Marine 20K forged steel globe valve |
| 76 | JIS-F7422 – 89 | Marine 20K forged steel angle valve |
| 77 | JIS-F7457 – 89 | Pneumatically operated remote cut-off device, emergency cut-off valve for ship fuel tank |
GB China National Standard Valve Part
| NO. | Standard code | Standard name |
| GB | ||
| 1 | GB12220 | Universal Valve Mark |
| 2 | GB12221 | Structural length of flanged metal valve |
| 3 | GB12222 | Connection of Multi-turn Valve Drive Device |
| 4 | GB12223 | Connection of part-turn valve drive device |
| 5 | GB12224 | General Requirements for Steel Valves |
| 6 | GB12225 | General Valve Copper Alloy Casting Technical Conditions |
| 7 | GB12226 | General Valve Gray Cast Iron Technical Conditions |
| 8 | GB12227 | General Valve Technical Conditions for Ductile Iron Castings |
| 9 | GB12228 | General Valve Carbon Steel Forging Technical Conditions |
| 10 | GB12229 | General Valve Carbon Steel Casting Technical Conditions |
| 11 | GB12231 | Appearance Quality Requirements for Valve Castings |
| 12 | GB12232 | General Valve Flanged Iron Gate Valve |
| 13 | GB1047 | Nominal diameter of pipes and piping accessories |
| 14 | GB12236 | General Valve Steel Swing Check Valve |
| 15 | GB1348 | Nodular Cast Iron |
| 16 | GB1048 | Nominal pressure of pipeline components |
| 17 | GB11365 | Accuracy of bevel gears and quasi-hyperbolic gears |
| 18 | GB4213 | General Technical Requirements for Pneumatic Control Valves |
| 19 | GB12238 | General Valve Flange Wafer Connection Butterfly Valve |
| 20 | GB8335 | Cylinder Professional Thread |
| 21 | GB10877 | Oxygen Cylinder Valve |
| 22 | GB12239 | General Valve Diaphragm Valve |
| 23 | GB12240 | General Valve Iron Plug Valve |
| 24 | GB12241 | General Requirements for Safety Valves |
| 25 | GB12242 | Safety Valve Performance Test Method |
| 26 | GB12243 | Spring Direct Load Type Safety Valve |
| 27 | GB11352 | Technical Conditions for Steel Castings |
| 28 | GB596 | Marine External Thread Bronze Stop Check Valve |
| 29 | GB597 | Marine External Thread Bronze Check Valve |
| 30 | GB5796 | Trapezoidal Thread |
| 31 | GB7306 | Pipe thread sealed with thread |
| 32 | GB7307 | Non-Thread Sealed Pipe Thread |
| 33 | GB6414 | Casting Dimension Tolerance |
| 34 | GB12245 | Reducing Valve Performance Test Method |
| 35 | GB12246 | Pilot-operated pressure reducing valve |
| 36 | GB12247 | Classification of Steam Traps |
| 37 | GB12248 | Steam Traps Terminology |
| 38 | GB12249 | Steam Traps Logo |
| 39 | GB12250 | Steam trap structure length |
| 40 | GB12251 | Steam trap test method |
| 41 | GB10868 | Technical Conditions of Power Plant Temperature and Pressure Reducing Valve |
| 42 | GB10869 | Technical Conditions for Power Station Control Valves |
| 43 | GB/T1972 | Butterfly Spring |
| 44 | GB12234 | General Valve Flange, Butt Welding Steel Gate Valve |
| 45 | GB12237 | General valve flange and butt welding connection steel ball valve |
| 46 | GB12233 | General Valve Iron Globe Valve and Lift Check Valve |
| 47 | GB9443 | Penetrating flaw detection and defect display marks rating method for steel castings |
| 48 | GB3323 | Radiography and Quality Classification of Steel Fusion Welding Butt Joints |
| 49 | GB12235 | General valve flange steel globe valve and lift check valve |
| 50 | GB1851 | Marine PN160 External Thread Bronze Air Globe Valve |
| 51 | GB8464 | Internal thread gate valve, globe valve, ball valve, check valve general |
| 52 | GB8465.1～7 | Internal thread gate valve, globe valve, ball valve, check valve size |
| 53 | GB5677 | Radiography of Steel Castings and Classification Method of Negative Films |
| 54 | GB12230 | General Valve Austenitic Steel Casting Technical Conditions |
| 55 | GB1804 | The limit deviation of tolerance and fit without tolerance dimension |
| 56 | GB12244 | Radiography of Steel Castings and Classification Method of Negative Films |
| 57 | GB10879 | Dissolved Acetylene Cylinder Valve |
| 58 | GB197 | Common Thread, Tolerance and Fit |
| 59 | GB1239.2 | Technical conditions for cold rolled cylindrical spiral compression springs |
| 60 | GB1239.4 | Hot-wound cylindrical spiral spring technical conditions |
| 61 | GB10095 | Accuracy of Involute Cylindrical Gears |
| 62 | GB9444 | Magnetic particle inspection and quality rating method for steel castings |
| 63 | GB/T13927 | General Valve Pressure Test |
| 64 | GB/T592 | Marine Flange Cast Iron Check Valve |
| 65 | GB/T1852 | Marine Flange Cast Steel Steam Pressure Reducing Valve |
| 66 | GB/T12252 | General Valve Supply Requirements |
