TIELING FLOW CONTROL VALVE CO., LTD
80+ valve production history 15+ foreign trade experience
42 Kunlun Mountain Road
Fanhe Town, Tieling, China
Numero di telefono
+86 24 7282 1717
Indirizzo email
tlfm@fcval.com
Lug Butterfly Valve
Features
- Design and manufacturing standards comply with API 609.
- The pressure test is in accordance with API 598.
- The structure length is in accordance with API 609.
- Applicable pressure: PN1.0 ~ 1.6MPa.
- Applicable size: DN50 ~ DN1200.
FCV helps you in the entire project: valve category, size and material, design standard, pressure level and exterior decoration. Please contact us or indicate your requirements on the inquiry form.
Order single or thousands item at a time. Our warehouse and flexible shipping is available for last-minute, tight-deadline orders.
*Customization is always available, please mark down your need in cart or just contact us.
Project Monitoring
Shipping Order Track
Quality certificates
VIP Customer Service
High quality valve
Details about Lug Butterfly Valve
Reduce the rotational torque, support the stem, and make it separate from the valve body effectively, reduce the wear of the valve stem.
After polishing treatment, with the valve seat precision.
To achieve zero leakage of airtightness test requirements, the opening and closing torque are small, extend the service life of the valve seat.
Stem seal is not easy to deform, thereby avoiding the usual stem leakage.
The utility model has the advantages of high precision and high strength and is suitable for the installation of the handle and other control devices.
The utility model is characterized in that the valve rod and the valve plate are firmly connected with the valve plate, and the utility model has the characteristics of anti-vibration and easy replacement.
Good integrity, easy to control the opening and closing of the valve plate.
The utility model has the advantages of no shedding, tensile resistance, leakage prevention, and convenient replacement.
Device for regulating or cutting off the medium in pipeline.
Suitable for handle control device (DN50 ~ 300), worm gear, electric, and pneumatic control device.
Device for regulating or cutting off the medium in pipeline.
Suitable for handle control device (DN50~300), worm gear, electric, and pneumatic control device.
Design and manufacturing standards comply with API 609.
The pressure test is in accordance with API 598.
The structure length is in accordance with API 609.
Side flange standard in accordance with GB/T17241 PN1.0MPa, PN1.6MPa, and ASME B16.1 125PSI.
Fluid medium: water, oil, gas, and various corrosive media
Using temperature: -10℃ ~ 120℃
Applicable pressure: PN1.0 ~ 1.6MPa
Applicable size: DN50 ~ DN1200
Connection mode: clamp type
Connection standard: GB·ANSI·DIN·API·ISO·BS
Body: cast iron, nodular cast iron, carbon steel, stainless steel, aluminum bronze
Seat: Rubber
Disc: nodular cast iron, stainless steel, aluminum bronze
Note: all components can be selected according to the actual conditions of different materials.
Request Information or Any question about this valve?
Please, fill the fields below to send us an information request
